Product Description:

Bosch Rexroth Indramat manufactures the MSK061C-0600-NN-M3-UP0-NNNN, a servo motor in the MSK IndraDyn S Synchronous Motors series. As a servo motor, it converts electrical energy into controlled rotary motion for positioning tasks in packaging machines, printing lines, and pick-and-place gantries. Integrated feedback allows precise speed and torque regulation, so the motor can serve as the drive element of a closed-loop axis within industrial automation equipment. Its design supports applications that require accurate motion control with a compact motor and integrated feedback in one housing.

Heat is removed through natural convection, so the housing fins dissipate losses without external blowers. The motor uses a standard mechanical design, and the drive end has a keyed shaft for positive torque transfer to pulleys or couplings. A rotatable 240° encoder connector eases cable routing in tight spaces while maintaining strain relief. Position feedback relies on the Hiperface protocol, and the encoder provides 16 signal periods through a capacitive scanning principle that resists dust and oil films. The enclosure has an IP65 rating, which helps protect the motor against dust and low-pressure water jets during operation. The motor is supplied without a holding brake, so load position during power-off must be maintained by external locking devices or drive-applied torque.

The motor has size 061 and motor length C, which correspond to the flange dimensions, stator diameter, and stack height used with winding code 0600. The feedback system uses a multiturn absolute encoder type, allowing the controller to track absolute position across 4096 revolutions and reducing the need for homing after startup. The unit operates in ambient temperatures from 0 to 40 °C without derating. Class F insulation with thermal class 155 helps protect the windings from overheating during continuous cyclic operation. These operating characteristics make the motor suitable for repeated motion cycles where stable thermal performance and consistent position feedback are required.