MSK061C-0600-NN-M2-UP1-RNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911317768
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
35 Seconds
The Bosch Rexroth Indramat MSK061C-0600-NN-M2-UP1-RNNN is an IndraDyn S Synchronous Servomotor from the MSK IndraDyn S Synchronous Motors series. This motor features natural convection cooling and a multiturn absolute optical encoder with a resolution of 2048 signal periods. It includes an electrically-released holding brake with a torque of 10 Nm and utilizes a rotatable 240° encoder connector.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MSK061C-0600-NN-M2-UP1-RNNN synchronous servomotor is manufactured by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. The unit acts as a rotary actuator that converts controlled current from a drive into repeatable torque and position for automated axes found in packaging equipment, pick-and-place modules, and general machine tools. A 061 frame combined with motor length code C provides a compact footprint, and the IndraDyn S architecture allows direct integration with compatible Rexroth drive controllers. Its compact housing supports use on axes where installation space is limited but stable closed-loop motion is still required.
Mechanical accuracy is supported by increased concentricity in the rotor and stator, which limits radial runout. Thermal energy leaves the housing through natural convection, so no external fan or coolant manifold is required. Position and speed feedback rely on an optical encoder that exchanges data over EnDat2.1, and its connector is rotatable through 240° to permit cable routing to either side of the motor. Within the sensor, 2048 signal periods are interpolated electronically, while multiturn absolute tracking stores turns beyond one revolution and eliminates homing cycles after power loss. This feedback arrangement gives the drive controller precise angular information while keeping the wiring layout flexible.
For static holding, the motor carries an electrically released brake rated at 10 Nm, allowing vertical loads to remain stationary when the inverter is disabled. Torque is transmitted through a shaft with a keyway, which mates directly with standard pulleys or coupling hubs and helps resist slip under cyclic loads. Internal copper follows winding code 0600, matching Rexroth drive databases for resistance, inductance, and current parameters for this frame size. The brake and keyed shaft make the motor suitable for applications that need secure load holding during stops and dependable torque transfer to connected mechanical elements.
Frequently Asked Questions about MSK061C-0600-NN-M2-UP1-RNNN:
Q: What type of encoder connector is used on the MSK061C-0600-NN-M2-UP1-RNNN motor?
A: This model features a rotatable encoder connector with a 240° adjustment range for flexible installation.
Q: Does the MSK061C-0600-NN-M2-UP1-RNNN motor come with a holding brake and what is its torque?
A: The MSK061C-0600-NN-M2-UP1-RNNN is equipped with an electrically-released holding brake providing 10 Nm of braking torque.
Q: What type of encoder and interface does the MSK061C-0600-NN-M2-UP1-RNNN use?
A: This motor uses an optical, multiturn absolute encoder with an EnDat2.1 interface and 2048 signal periods resolution.
Q: How is the MSK061C-0600-NN-M2-UP1-RNNN motor cooled?
A: Cooling for the MSK061C-0600-NN-M2-UP1-RNNN motor is accomplished through natural convection without the need for external fans.
Q: What type of shaft does the MSK061C-0600-NN-M2-UP1-RNNN motor have?
A: The shaft of this motor is equipped with a keyway for secure mechanical coupling.
