Product Description:

The MSK061C-0600-NN-M2-UG0-RNNN is a synchronous servomotor manufactured by Bosch Rexroth Indramat and supplied as part of the MSK IndraDyn S Synchronous Motors series. It converts electrical power into precisely regulated mechanical motion, allowing automated machinery to position loads with repeatable accuracy. The motor’s integrated feedback device, compact frame, and cabling provisions support direct mounting to gearboxes or belt stages in assembly lines, packaging stations, and pick-and-place gantries. It is well suited for indexing, transfer, and synchronized axis duties that require stable response during repeated motion cycles. By delivering continuous torque while tracking commanded position, it supports high-duty-cycle industrial automation tasks.

Cooling is provided by natural convection, eliminating external blowers and simplifying enclosure layout while keeping stator temperatures within the limits of winding code 0600. The housing carries an IP65 rating, which guards internal components against dust ingress and low-pressure water jets on factory floors at ambient temperatures from 0 °C to 40 °C. Feedback signals are generated by an optical encoder that communicates through the EnDat2.1 interface and provides 2048 signal periods per revolution for accurate position feedback. This encoder arrangement gives the drive reliable rotor data for closed-loop speed and position control. For flexible cable routing, the encoder connector is rotatable through 240°, and the design uses increased concentricity to minimize runout when the motor is coupled to precision gearheads.

The encoder retains position over power cycles through its multi-turn absolute function, enabling immediate drive homing even though the unit is supplied without a holding brake. Torque is transmitted through a plain shaft, whose smooth geometry suits backlash-free clamp couplings. This shaft style supports direct clamping without keyed transmission elements. The motor has size 061 and length code C, which gives a balanced ratio between peak torque and inertia for mid-range axes. Class 155 insulation permits sustained winding temperatures up to 155 °C and supports dielectric integrity during normal operation.