Product Description:

The MSK061C-0600-NN-M1-UP1-NSNN synchronous servo motor is produced by Bosch Rexroth Indramat within the MSK IndraDyn S Synchronous Motors series. As a compact IndraDyn S motor in size 061 and length C, it converts electrical energy from a compatible drive into precisely controlled torque and speed for positioning axes, pick-and-place gantries, and similar industrial automation tasks that rely on closed-loop motion control. In automated equipment, this supports controlled acceleration, stable running speed, and repeatable stopping behavior on transfer, indexing, and handling axes. The design option supports both standard service and areas that require explosion protection.

Heat generated in the stator is dissipated by natural convection, so the housing fins must remain exposed to ambient air rather than enclosed by ductwork. The encoder connection uses a 240° rotatable plug that can be turned during installation to reduce cable strain and accommodate tight layouts. Position feedback travels through the Hiperface interface, and the optical scanning system resolves 128 signal periods. This feedback arrangement supports closed-loop coordination between the motor and the drive during precise motion sequences. Because the sensor is a multi-turn absolute device, it can return an unambiguous position value even after power loss. An electrically released holding brake is included to secure the shaft during commanded stops or interruptions.

The integrated brake generates 10 Nm of static torque, which is suitable for holding the shaft when vertical loads are present. Environmental sealing meets IP65, helping block dust and water jets from the motor housing. Thermal endurance follows class 155, so the winding insulation tolerates the elevated temperatures associated with continuous duty on winding code 0600. The shaft has a keyway for torque transfer to pulleys or couplings, and the permitted operating range is 0 °C to 40 °C with clear space around the housing to maintain convection paths.