Product Description:

The MSK061C-0600-NN-M1-UP0-NSNN is an IndraDyn S synchronous servomotor produced by Bosch Rexroth Indramat within the MSK IndraDyn S Synchronous Motors series. It provides closed-loop rotary motion for positioning axes and feed drives in industrial automation, where the drive uses encoder feedback to regulate speed and position with high repeatability. That operating role makes it suitable for servo-driven transport modules, indexing tables, and other machinery that depends on smooth acceleration and controlled stopping. The motor has length C and winding code 0600, which place it in a compact housing suited to tightly spaced machine layouts. It is supplied without a holding brake, so any axis that must remain fixed at standstill requires external mechanical locking or drive-applied torque during power-off conditions.

Thermal dissipation relies on natural convection, so airflow around the housing must remain unobstructed during continuous duty cycles. The housing carries an IP65 rating that helps keep out dust and low-pressure water jets, and the specified ambient operating window is 0 to 40 °C. Feedback is produced by an optical encoder that delivers 128 signal periods per revolution and communicates through the Hiperface interface. This feedback format supports precise commutation and stable closed-loop behavior across a wide speed range. The encoder connector can be rotated through 240 degrees, which helps route cables in confined cabinets and along crowded machine frames.

Mechanical transmission is through a shaft with keyway, which supports positive torque transfer to pulleys, couplings, or gearboxes. The keyed output also helps prevent slip in applications that see frequent reversals or rapid load changes. Absolute position data are retained through power cycles because the encoder is a multi-turn absolute model, allowing the drive to recover shaft position after restart without relying on a new reference move in many applications. The motor belongs to size 061, giving it a compact frame that fits common servo installations while still supporting useful torque density for packaging, handling, and machine-tool axes. Its windings use insulation class 155, which supports elevated internal temperatures during cyclic duty and helps protect the stator system under repeated load changes.