Product Description:

The MSK061C-0600-NN-M1-UG1-NSNN is a synchronous servo motor produced by Bosch Rexroth Indramat and supplied within the MSK IndraDyn S Synchronous Motors series. It serves as a compact rotary actuator for positioning and speed-controlled axes in automated machinery. By combining a permanent-magnet rotor with high-resolution feedback, the motor provides closed-loop motion control without mechanical transmission backlash, making it suitable for packaging stations, pick-and-place gantries, and similar duties where accurate torque and velocity regulation are required.

The housing achieves a protection rating of IP65, so internal components are sealed against dust ingress and low-pressure water jets. Cooling relies on natural convection, meaning heat is dissipated through the surface without fans or liquid circuits; this simplifies maintenance and reduces noise. Position data are transferred through a rotatable 240° connector that supports the Hiperface interface, and the optical encoder yields 128 signal periods per mechanical revolution for fine interpolation by the drive controller. An electrically released brake provides up to 10 Nm of static holding torque to secure vertical loads when power is removed. The C-length stator, 061 frame size, and 0600 winding code establish the electromagnetic stack so that rated current, inductance, and voltage match standard Rexroth drive inverters.

The encoder employs a Multiturn Absolute scanning method, so shaft position is retained across 4,096 revolutions without battery backup, which streamlines homing after shutdowns. Continuous service is permitted between 0–40 °C, covering typical shop-floor climates when the motor is mounted inside machines or on open frames. Power is transmitted through a plain shaft, which accepts friction-fit couplings and minimizes torsional play. Class F insulation is confirmed by the temperature index of 155, allowing the winding to operate safely at elevated hot-spot temperatures while maintaining expected service life.