Product Description:

The MSK061C-0600-NN-M1-UG0-NSNN is a synchronous servomotor manufactured by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. This motor is sized for medium-torque applications, carries the internal length code C, and is delivered in the standard explosion-protected design variant. Within automated cells, it receives current-controlled signals from an IndraDrive controller and translates them into precise rotary motion, allowing conveyors, pick-and-place arms, or packaging stations to follow programmed position or velocity profiles without mechanical backlash.

The unit is cooled by natural convection, so heat is dissipated through the housing without fans or liquid circuits. Its housing seals to IP65, blocking airborne dust and water jets that are common near wash-down lines. Reliable operation is specified for ambient temperatures between 0 to 40 °C; outside this range, derating or external conditioning is required. For position feedback, an optical encoder provides multi-turn absolute data, enabling the drive to know shaft position even after power loss, while its resolution of 128 signal periods per revolution supports fine interpolation inside the drive controller.

The feedback signal leaves the motor through a Hiperface interface, and the connector can be rotated through 240° to suit cabinet wiring routes. Thermal endurance is tied to insulation class 155, so winding temperature can rise to 155 °C before degradation begins. Electromagnetic behavior is set by winding code 0600, which matches this motor to a specific current-torque curve in the IndraDrive parameter set. Additional mechanical characteristics include a plain shaft for coupler-based transmission and the absence of a holding brake, placing responsibility for static torque on the drive or external locks.