Product Description:

The MSK061C-0600-NN-M1-UG0-NNNN belongs to the MSK IndraDyn S Synchronous Motors series developed by Bosch Rexroth Indramat. As an IndraDyn S synchronous servomotor, it provides closed-loop rotary motion for positioning tasks in packaging machines, handling axes, and similar industrial automation platforms. The unit follows the manufacturer’s standard design layout and is intended for natural cabinet mounting where forced airflow is not available, allowing machine builders to integrate it without additional cooling hardware.

The housing is cooled by Natural convection, so heat is carried away only through surface radiation and ambient airflow, a factor that influences permissible continuous torque. Feedback signals leave the motor through a connector that is rotatable 240°; this adjustable plug helps clear tight cable routes in multi-axis assemblies. Inside the encoder chamber, an optical scanner uses the Hiperface interface to transmit position data. Its code disc delivers 128 signal periods per mechanical revolution, giving the drive controller fine commutation resolution even at low speed. Because the scanning principle is optical, position accuracy remains stable over temperature variations and magnetic fields that could disturb inductive devices.

Mechanical features match the medium frame of the series. The motor is supplied without a holding brake, so external clamping or drive torque must secure static loads when power is removed. A plain shaft transfers torque to couplings or timing belts without keyways, minimizing concentricity errors. Frame size 061 defines the stator diameter, while the length code C establishes the active stack height for the required power density. The electromagnetic section follows winding code 0600, giving voltage constant and rated current values that align with standard IndraDrive power modules and permit straightforward parameter selection during commissioning.