Product Description:

The MSK061C-0600-NN-M1-AG0-NNNN is an IndraDyn S synchronous servomotor produced by Bosch Rexroth Indramat and assigned to the MSK IndraDyn S Synchronous Motors series. As a compact servo actuator, it is built for closed-loop positioning and speed control in automated machinery, providing direct rotary torque where precision and repeatability are required in packaging lines, handling stations, and metal-cutting equipment. Its 061 frame size and C length give it moderate power density while keeping the installation footprint suitable for multi-axis systems that share a common mounting grid. This motor format is suitable for axes that need responsive servo behavior without the larger envelope of higher-frame units.

Heat dissipation relies on natural convection, so no forced-air components are added and thermal energy is released through the finned housing. Rotor position feedback is handled by a Hiperface interface that transmits digital position data and analog sine-cosine signals to compatible drive controllers. The internal encoder generates 128 signal periods per mechanical revolution, and its optical scanning principle supports high signal fidelity during low-speed motion. Because the encoder uses a multi-turn absolute format, the controller receives absolute shaft position over several revolutions without requiring a homing routine after power is restored. That feedback arrangement supports stable control during positioning and speed regulation.

The motor is delivered without a holding brake, so static load retention must be provided by mechanical clamping or drive-controlled torque when needed. A plain shaft transfers torque through a suitable coupling, and power together with protective earth conductors is routed through the A-side connector for orderly cable routing. The stator uses winding code 0600, which matches the electrical characteristics expected by compatible drive modules for this frame size. This layout helps keep wiring compact in tightly spaced machine assemblies.