Product Description:

The MSK061C-0300-NN-M3-UP1-NNNN is an IndraDyn S synchronous servomotor produced by Bosch Rexroth Indramat for industrial automation. As part of the MSK IndraDyn S Synchronous Motors series, it converts drive output into precise rotary motion for tooling, conveyors, and pick-and-place heads. When paired with a compatible servo drive, it supports accurate speed and position control in machines that require repeatable axis movement. Its synchronous design allows the controller to coordinate torque production closely with commanded motion profiles across indexing, transfer, and handling tasks. This makes the motor suitable for equipment that depends on smooth response during frequent starts, stops, and position changes.

This model is built in motor size 061 and uses natural convection for cooling, so no external blower is required. The housing is sealed to IP65, which helps protect internal parts from dust and water spray. Its electrically released holding brake provides 10 Nm of static torque to secure vertical loads during power loss. Operation is permitted at ambient temperatures from 0–40 °C, which suits most enclosed machine installations. A keyed output shaft simplifies torque transfer to pulleys or couplings, and motor length code C provides a practical balance between inertia and continuous torque. Winding code 0300 indicates the electrical characteristics expected by the companion inverter, helping the drive match current delivery to the motor.

For feedback, a multi-turn absolute encoder provides 16 signal periods through the Hiperface serial interface. The sensing element uses capacitive technology, which helps it resist magnetic interference and vibration in demanding motion systems. A rotatable 240° connector lets the cable exit in a convenient direction and reduces bend stress where the harness leaves the motor. Because the connector can be rotated, cable routing can be adapted to the available installation space without forcing a tight twist at the outlet. The motor uses insulation class 155, allowing winding temperatures up to 155 °C and supporting continuous duty at rated load. The feedback system also provides immediate position information after startup, which is useful in machine layouts that depend on fast restart behavior.