Product Description:

The MSK061C-0200-NN-S1-UP1-NSNN is a synchronous servomotor from the MSK IndraDyn S Synchronous Motors series produced by Bosch Rexroth Indramat. Within an automation cell it delivers controlled torque and position feedback for coordinated axes, supporting packaging, metal-working, and pick-and-place systems. The part number denotes motor size 061 in length C with winding code 0200, and the manufacturer offers both standard and explosion-protected design variants for flexible installation.

Thermal management is handled through Natural convection, so heat is dissipated through the housing without forced air or liquid aids. An enclosure rating of IP65 seals the stator against dust ingress and low-pressure water jets, allowing cabinet-free mounting near the tooling zone. The motor’s feedback chain is built around a Hiperface interface; the rotatable 240° encoder connector lets the cable exit be positioned to avoid strain during installation. Inside the encoder, an Optical sensing element generates 128 signal periods per revolution, giving the drive controller enough position granularity for smooth commutation and precise velocity loops even at low speeds.

Position data is absolute across one revolution because the encoder is Singleturn, which simplifies homing routines on power-up. For static axis holding, an electrically released brake supplies 10 Nm of torque, preventing drift when power is removed. The motor can be operated reliably between 0-40 °C, aligning with typical machine-shop ambient conditions and the unit’s insulation class 155 thermal limit. Mechanical coupling is straightforward thanks to a Shaft with keyway, and the rotatable connector complements this by easing routing in tight spaces. These characteristics complete the functional envelope defined by the 061 frame, C length, and explosion-protected option.