Product Description:

The MSK061C-0200-NN-S1-UP1-NNNN is an IndraDyn S synchronous servomotor from Bosch Rexroth Indramat in the MSK IndraDyn S Synchronous Motors series. It is used as a compact servo actuator for indexing tables, linear stages, and gantry axes that require accurate torque and speed control during automated production. The motor is intended for applications where repeatable starts, stops, and position changes are important for cycle quality. Its compact format helps it fit machine sections with limited mounting space, while closed-loop feedback allows the connected drive to correct motion errors during operation. This supports stable axis behavior in packaging, printing, and assembly equipment.

Heat generated in operation is removed by natural convection, so the motor does not require additional fans or coolant plumbing. The housing uses the standard 061-frame design, and the C-length stator provides balanced power density for this motor size. A connector that is rotatable through 240° lets the feedback cable exit in several directions, which helps when space behind a panel or machine guard is limited. Position data are transmitted through the Hiperface interface, and the optical system provides 128 signal periods per mechanical revolution. The encoder is single-turn, so absolute position information is available only within one revolution.

The 0200 winding code corresponds to the C-length core and indicates the electrical characteristics used by the matching drive. An electrically released brake provides 10 Nm of holding torque at standstill, which helps retain the load when the axis is not moving. The motor uses a keyed shaft for torque transmission, and the housing is sealed to IP65 to resist dust and low-pressure water jets. Insulation class 155 supports continuous cyclic duty, and operation is permitted in ambient temperatures from 0 to 40 °C without derating.