Product Description:

The MSK061C-0200-NN-S1-UG1-NNNN is an IndraDyn S synchronous servomotor produced by Bosch Rexroth Indramat within the MSK IndraDyn S Synchronous Motors series. This motor converts drive output from Rexroth controllers into precise rotary motion for indexing tables, packaging axes, or material-handling equipment. Its electromagnetic design, compact 061 frame, and shaft configuration allow direct coupling to gear stages or load-side mechanics, while the integrated encoder supports tight position regulation during closed-loop automation tasks.

Heat from the stator windings is carried away by natural convection, so no external blower or liquid circuit is required. Feedback signals are generated by an optical encoder that uses the Hiperface protocol, and the code disk provides 128 signal periods per revolution for contouring applications. Because the encoder is a single-turn type, absolute position is retained within one mechanical turn, which simplifies homing routines. A spring-applied, electrically released brake supplies 10 Nm of holding torque, letting vertical or suspended loads remain stationary when the drive is disabled. The encoder connector can rotate through 240°, which helps with cable routing inside crowded machine frames, and the motor uses the standard mechanical design identified by length code C.

The housing has an IP65 rating, which prevents dust ingress and guards against low-pressure water jets, while a plain shaft transmits torque without keyway stress concentrations. Continuous duty is permitted at ambient temperatures from 0 to 40 °C, and Class 155 insulation supports the winding temperatures associated with high current densities in that range. The stator uses winding code 0200, which corresponds to the back EMF, resistance, and current values matched to this motor configuration. The laminations and passive heat removal help keep the motor compact for installations where mounting space is limited.