Product Description:

The MSK061C-0200-NN-S1-UG0-NNNN is an IndraDyn S synchronous servomotor produced by Bosch Rexroth Indramat and supplied within the MSK IndraDyn S Synchronous Motors series. Designed for closed-loop automation, the unit converts drive-controller output into accurate rotary motion for positioning, feed, and auxiliary axes on packaging machines, handling systems, and machining centers. Permanent-magnet excitation and a balanced rotor let the motor achieve stable torque with low cogging, while its housing geometry supports direct flange mounting to gearboxes or belt transmissions where space is limited.

Thermal losses are removed by natural convection, so the installation only needs unobstructed airflow rather than external fans or liquid cooling. A rotatable 240° feedback connector eases cable routing inside crowded cabinets without twisting the seals. Position data are transmitted over the Hiperface interface, and the built-in encoder resolves the shaft angle across 128 signal periods. Because the sensing principle is optical, the feedback maintains low interpolation error even at high speeds. The measuring system is a single-turn device, delivering an absolute position once per revolution and meeting the requirements of axes that home at power-up but do not need multi-turn counting.

This standard motor is assembled in length code C and uses a plain shaft to permit backlash-free clamp coupling. The motor uses winding code 0200, which sets the resistance and inductance values expected by the servo amplifier. Frame size 061 offers a balance between torque density and overall size for medium-power workstations. Shipped without a holding brake, the axis relies on active drive torque or external mechanical locks to secure position during power-off, allowing independent braking hardware to be selected for vertical or safety-critical loads.