MSK061C-0200-NN-M3-UG1-NNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911388875
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
25 Seconds
The Bosch Rexroth Indramat MSK061C-0200-NN-M3-UG1-NNNN is part of the MSK IndraDyn S Synchronous Motors series and features a plain shaft with natural convection cooling. This servomotor includes a rotatable encoder connector, multiturn absolute capacitive encoder with Hiperface interface, and a holding brake with 10 Nm torque. The motor has IP65 protection and is rated for ambient temperatures from 0 to 40°C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth Indramat manufactures the MSK061C-0200-NN-M3-UG1-NNNN as a member of the MSK IndraDyn S Synchronous Motors series. The unit is a compact servo motor intended for closed-loop positioning and velocity control in automated machinery such as pick-and-place stations, packaging axes, and injection-molding ejectors. Its frame size 061 and length code C provide a mid-range torque option while maintaining compatibility with IndraDrive controllers and standard power connectors. This motor layout is well suited to axes that require repeatable motion in a compact installation space.
The motor dissipates heat through natural convection, so no external fan or liquid circuit is required. A housing rated at IP65 blocks dust and low-pressure water jets, allowing installation on unsealed production lines. Feedback is supplied by a rotatable encoder connector set at 240°, and the signal path uses the Hiperface protocol for simultaneous position and parameter transmission. Inside the encoder, a resolution of 16 signal periods per revolution supports fine interpolation, while the sensing element uses capacitive technology for high shock tolerance and immunity to magnetic fields.
An electrically released holding brake delivers 10 Nm of static torque to keep vertical loads secure when power is removed. Continuous service is permitted for ambient conditions between 0–40 °C, which matches typical factory environments. The motor uses insulation class 155, allowing the windings to withstand elevated operating temperatures during repeated acceleration cycles. The rotor has a plain shaft that mates directly to clamp or keyless couplings, helping avoid backlash associated with keyed connections. Winding code 0200 corresponds to the motor’s electrical winding arrangement, and the standard mechanical design supports installation on common MSK mounting interfaces.
Frequently Asked Questions about MSK061C-0200-NN-M3-UG1-NNNN:
Q: What type of encoder is featured on the MSK061C-0200-NN-M3-UG1-NNNN motor?
A: The MSK061C-0200-NN-M3-UG1-NNNN is equipped with a multiturn absolute encoder using Hiperface interface and capacitive technology.
Q: What is the specification and function of the holding brake on the MSK061C-0200-NN-M3-UG1-NNNN?
A: This motor includes an electrically-released holding brake with a holding torque of 10 Nm.
Q: What type of shaft does the MSK061C-0200-NN-M3-UG1-NNNN motor use?
A: The shaft on this model is a plain shaft configuration.
Q: How is the MSK061C-0200-NN-M3-UG1-NNNN motor cooled?
A: This motor features natural convection cooling, operating without forced air or additional cooling systems.
Q: What is the protection rating of the MSK061C-0200-NN-M3-UG1-NNNN motor?
A: With an IP65 protection rating, this motor is protected against dust ingress and water jets.
