Product Description:

The MSK061C-0200-NN-M2-UP1-RNNN is a synchronous servo motor engineered by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. The unit converts electrical energy into controlled rotary motion for positioning tasks in industrial automation such as packaging lines, pick-and-place modules, and CNC auxiliary axes. By receiving regulated three-phase power from an IndraDrive controller and returning absolute position data through its integrated encoder, it supports a closed-loop axis with repeatable torque and velocity control. Its compact servo design suits axes that need quick response and repeatable starts and stops during frequent cycling.

Thermal management is handled by natural convection, so excess heat leaves the frame without fans or liquid circuits, simplifying cabinet design. The cast housing carries a protection rating of IP65, which blocks dust ingress and low-pressure water jets, allowing direct mounting on machinery. Operation is specified between 0–40 °C, and within this range the motor can deliver full torque without derating. Internally, class 155 insulation withstands winding temperatures associated with continuous duty. A machined shaft with a keyway transfers torque to pulleys or couplings while helping prevent slip. Increased concentricity in the rotor limits radial runout, and the C length variant pairs with the 061 frame size and winding code 0200 for this motor configuration.

The feedback subsystem uses an optical encoder that communicates through EnDat2.1, and its connector can be rotated through 240° to align with cable runs in cramped enclosures. The sensor delivers position data at 2048 signal periods per mechanical revolution, and the multi-turn absolute function preserves shaft position across power-off events. This allows the axis to recover position immediately after startup without a reference cycle. Motion can be locked when power is removed because an electrically released holding brake supplies 10 Nm of static torque, a value suited to vertical loads that match the inertia envelope of the 061 frame.