MSK061C-0200-NN-M1-UG0-NNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911326109
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
39 Seconds
The Bosch Rexroth Indramat MSK061C-0200-NN-M1-UG0-NNNN is an IndraDyn S Synchronous Servomotor from the MSK IndraDyn S Synchronous Motors series. This standard design motor has a natural convection cooling method, a plain shaft, and an IP65 protection rating. It features a multiturn absolute optical encoder with Hiperface interface and a rotatable 240-degree encoder connector.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MSK061C-0200-NN-M1-UG0-NNNN servo motor is manufactured by Bosch Rexroth Indramat as part of the MSK IndraDyn S Synchronous Motors series. This rotary unit is designed for closed-loop drive systems in packaging lines, machine tools, and material-handling cells where coordinated and high-resolution motion is required. When combined with a Rexroth inverter, the motor converts three-phase electrical energy into tightly regulated shaft torque, supporting rapid indexing, contouring, and positioning tasks that characterize modern industrial automation. Its compact housing eases cabinet layout and direct mounting inside mechanical frames.
Heat is removed through natural convection, so airflow around the housing must remain unobstructed to maintain continuous torque without external blowers. Position feedback is delivered over the Hiperface protocol, allowing the drive controller to read absolute rotor data at power-up with minimal wiring. Inside the encoder, optical scanning generates 128 signal periods, which the control electronics interpolate for sub-arc-minute resolution. The enclosure carries an IP65 rating, and all joints and seals block dust ingress and water jets encountered on factory floors. Reliable operation is specified for ambient temperatures from 0 to 40 °C, permitting installation in standard control rooms without supplemental cooling equipment.
The mechanical envelope follows the 061 frame size with motor length code C, giving a balanced ratio of inertia to power for mid-range axis loads. Stator windings identified by code 0200 tailor phase resistance and inductance to moderate-current inverters, and insulation class 155 withstands the internal hot-spot temperatures produced during dynamic cycles. A plain shaft mates directly with backlash-free couplings, and an external brake or gearbox must be used because the motor ships without a holding brake. The rotatable 240° encoder connector simplifies cable routing, and the multi-turn absolute optical encoder preserves position after power loss. A standard design housing supports horizontal or vertical mounting inside machinery.
Frequently Asked Questions about MSK061C-0200-NN-M1-UG0-NNNN:
Q: How is the MSK061C-0200-NN-M1-UG0-NNNN motor cooled?
A: This motor features natural convection cooling, meaning it does not require external fans or forced cooling systems.
Q: Does the MSK061C-0200-NN-M1-UG0-NNNN include a holding brake?
A: The MSK061C-0200-NN-M1-UG0-NNNN operates without a holding brake installed.
Q: What is the protection rating of the MSK061C-0200-NN-M1-UG0-NNNN motor?
A: This model offers an IP65 protection rating, providing a high level of dust and water resistance.
Q: What type of encoder does the MSK061C-0200-NN-M1-UG0-NNNN use and what are its key features?
A: The encoder included uses Hiperface interface, operates on optical technology, and provides multiturn absolute feedback with 128 signal periods of resolution.
Q: What kind of shaft does the MSK061C-0200-NN-M1-UG0-NNNN servo motor have?
A: It is equipped with a plain shaft, offering a simple mechanical interface without a keyway or special features.
