Product Description:

The MSK060C-0600-NN-S2-UG1-RNNN is an IndraDyn S synchronous servomotor produced by Bosch Rexroth Indramat within the MSK IndraDyn S Synchronous Motors series. It converts electrical power into controlled torque and speed for automation tasks that require precise rotary positioning in robotics, pick-and-place units, and CNC feed drives. With a frame size of 060 and a length code of C, the unit fits compact machine frames where available space is limited.

Cooling is handled by natural convection, so heat leaves the housing through surface radiation and ambient airflow without fans. This arrangement requires adequate clearance around the motor to support consistent heat dissipation during operation. A design rated for increased concentricity limits radial runout, which helps maintain smooth motion under changing loads. The feedback connector is rotatable, 240°, allowing the cable outlet to be aligned with surrounding machine layouts while reducing cable strain. Position and velocity data travel over the EnDat2.1 interface, and the encoder provides 2048 signal periods per revolution for accurate feedback processing in the drive controller.

The optical sensor uses a single-turn measuring method, so the controller resets position after each full revolution unless the system adds an external multiturn reference. An electrically released holding brake delivers 10 Nm of static torque to keep vertical or inertial loads at rest when power is removed. The motor uses a plain shaft, which supports force-fit couplings and avoids the stress concentration associated with a keyway. Its electromagnetic behavior is determined by the 0600 winding code, which sets the resistance, inductance, and rated current values expected by the matching drive. This combination supports stable closed-loop operation in applications that require repeatable motion and compact motor installation.