Product Description:

The MSK060C-0600-NN-S1-UP0-NSNN is a synchronous servo motor built by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. The motor converts electrical power from an IndraDrive amplifier into tightly regulated rotary motion, giving machine builders a compact actuator for indexing tables, carton erectors, or small-format printing cylinders. By integrating a precise optical encoder and a keyed shaft, the unit fits directly into closed-loop axes where high dynamic response and repeatable positioning are required for consistent product throughput.

Cooling is provided by natural convection, so heat is dissipated through the housing surface without forced airflow, which simplifies cabinet layouts and avoids fan maintenance. The encoder cable plug is rotatable through 240°, allowing the connector to be turned around the flange to reduce strain on tight wiring runs. Position feedback is supplied over the Hiperface interface, which carries both incremental and absolute data for closed-loop drives. Inside the encoder, the resolution is 128 signal periods, giving sufficient interpolation for smooth velocity regulation. The motor is a standard unit with explosion-protection capability, so the housing and winding insulation meet requirements for classified areas.

Feedback hardware is based on optical sensing, so interpolation accuracy is not affected by magnetic interference. The device uses a single-turn count, providing absolute position within one mechanical revolution, while multi-turn data must be derived by the controller. It ships without a holding brake, making it suitable for applications where mechanical locking or gravity-load support is handled externally. Torque is transmitted through a shaft with a keyway, a form preferred for rigid couplings. With the compact 060 frame size and the C-length stack, the 0600 winding code suits moderate-current drives while keeping thermal rise within the limits of natural convection.