Product Description

The MSK060C-0600-NN-M3-BG1-NNNN synchronous servomotor from Bosch Rexroth features an optical encoder system. The motor also incorporates a standard smooth output shaft and a holding brake. The product has a small and compact size that makes it suitable for confined spaces. The device belongs to the manufacturer’s MSK product group of such offerings. This unit must be handled only after reading and understanding the notes pertaining to the intended use and safety. It supports forced ventilation with an axial flow fan or a radial fan. This motor should be connected to a drive controller that has to be programmed before the startup is done. The unit should not have an additional varnish coating on its housing.

This product is meant to be operated only in the explicitly mentioned configuration along with the specified firmware and software. The device must be properly and correctly mounted, installed, transported and stored for safe and optimum operation. This unit can cause the associated drive controller to move dangerously if there is a fault in the way it is controlled. It is necessary to secure the vertical axes of the controller from falling after switching OFF the power of the motor. This can be done by either mechanically securing or counterbalancing the axis.

The motor tends to have very hot housing during and soon after operation. This product features a size code of 060. The device should never be started before establishing a proper ground connection by using a motor cable. Its discharge or leakage current flows over the conducting housing parts if the grounding connector in the motor cable is not connected. The unit may cause damage to property or personnel injury if its connectors are connected or disconnected in the energized state. This motor comes with a maximum speed of 6000min^-1. This servomotor can be shipped all over the world with a one-year warranty.