MSK060C-0600-NN-M1-UP1-NSNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911312645
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
8 Seconds
The Bosch Rexroth Indramat MSK060C-0600-NN-M1-UP1-NSNN is part of the MSK IndraDyn S Synchronous Motors series. This servomotor features natural convection cooling and an electrically-released holding brake with a 10 Nm brake torque. It uses an optical multiturn absolute encoder with Hiperface interface and a rotatable 240-degree connector.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MSK060C-0600-NN-M1-UP1-NSNN is a synchronous servo motor produced by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. Within an automation cell, it converts the regulated output of a drive controller into rotary motion for precise indexing, point-to-point moves, or continuous speed regulation on packaging, printing, and machining lines. It is intended for coordinated servo axes where commanded motion must be translated into stable shaft rotation with repeatable response. This makes the motor suitable for machines that run frequent starts, stops, and speed changes during normal production.
This motor relies on natural convection so heat leaves the stator housing without forced airflow, which simplifies installation where clean, unobstructed air can circulate around the motor surface. Feedback is transmitted through the Hiperface interface, allowing bidirectional exchange of position and motor nameplate data between the encoder and the drive. Inside the encoder, an optical scanning system generates high-resolution tracks, and its multiturn absolute capability counts complete revolutions by means of a battery-free gear set, so position information is retained after power is removed. Because absolute position data remains available, the connected drive can identify shaft position immediately at startup in many machine sequences. An electrically released holding brake supplies 10 Nm of torque to keep vertical or suspended loads stationary when the drive is disabled.
The feedback plug is mounted on a rotatable 240° flange, which allows the connector outlet to be turned for better cable routing in confined machine spaces. Torque is transmitted through a shaft with keyway, giving a positive mechanical connection for standard pulleys or couplings. The encoder provides a base resolution of 128 signal periods per revolution, and the drive interpolates this signal to finer electronic increments for motion control. The motor is available in an Explosion Protection variant for applications that require reduced ignition risk, while keeping the same winding code, length C housing, and size 060 frame indicated by the ordering code.
Frequently Asked Questions about MSK060C-0600-NN-M1-UP1-NSNN:
Q: Does the MSK060C-0600-NN-M1-UP1-NSNN servo motor include a holding brake?
A: This model is equipped with a holding brake that is electrically released and provides a braking torque of 10 Nm.
Q: What type of encoder and resolution does the MSK060C-0600-NN-M1-UP1-NSNN feature?
A: The encoder on this motor uses optical technology and provides 128 signal periods for precise feedback.
Q: How is the MSK060C-0600-NN-M1-UP1-NSNN servo motor cooled?
A: The cooling method for this motor is natural convection, requiring no external fans or coolers.
Q: What type of shaft does the MSK060C-0600-NN-M1-UP1-NSNN have?
A: The shaft on this model features a keyway design, allowing for secure mechanical coupling.
Q: What is special about the encoder connector on the MSK060C-0600-NN-M1-UP1-NSNN?
A: The encoder connector on this motor is rotatable up to 240°, facilitating flexible installation.
