MSK060C-0300-NN-S1-UP1-NNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911307214
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
58 Seconds
The Bosch Rexroth Indramat MSK060C-0300-NN-S1-UP1-NNNN is a synchronous servomotor from the MSK IndraDyn S Synchronous Motors series. It features natural convection cooling, a shaft with keyway, and a holding brake with 10 Nm torque. This motor uses a rotatable 240° encoder connector and Hiperface optical singleturn encoder with 128 signal periods.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MSK060C-0300-NN-S1-UP1-NNNN is a rotary IndraDyn S synchronous servomotor produced by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. It serves closed-loop industrial axes by converting drive controller current into tightly regulated torque and speed, allowing positioning stages, gantry arms, and packaging spindles to follow digital setpoints with minimal error. By combining an integrated feedback channel with a compact housing, it fits space-constrained machine layouts. The motor is well suited to applications that need repeatable motion without requiring a large installation envelope.
Its standard mechanical design streamlines mounting, while thermal management is handled exclusively through natural convection, so airflow paths around the fins must remain unobstructed. The stator uses the 060 frame diameter with the C length option, giving moderate mass and continuous output suitable for mid-range manipulators. Electromagnetic behavior is set by winding code 0300, which sets the phase resistance and flux linkage seen by the drive. Position information is delivered through the Hiperface serial channel, and a code disk generates 128 signal periods for fine angular feedback that the controller interpolates for velocity control. A keyed shaft helps prevent slip between the motor and the driven element, which supports stable torque transfer in direct-coupled axes.
The feedback module relies on Optical scanning of the code track and is configured for a single-turn count, which is suitable where absolute position wraps are not required. To ease cable routing in tight cabinets, the encoder connector can be swiveled through 240°, giving multiple exit orientations without adapters and helping reduce cable strain near panels or guarding. During power-off events, an electrically released brake clamps the rotor with 10 Nm of static torque, holding suspended or cantilevered loads until the servo drive is re-energized. This arrangement supports controlled stops and stable load retention when the axis must remain stationary between motion cycles.
Frequently Asked Questions about MSK060C-0300-NN-S1-UP1-NNNN:
Q: How is the MSK060C-0300-NN-S1-UP1-NNNN motor cooled?
A: The MSK060C-0300-NN-S1-UP1-NNNN uses natural convection cooling for heat dissipation without the need for forced air or liquid cooling systems.
Q: Does the MSK060C-0300-NN-S1-UP1-NNNN motor include a holding brake, and what is its torque?
A: This model features a holding brake that is electrically-released and provides a torque of 10 Nm.
Q: What type of encoder interface does the MSK060C-0300-NN-S1-UP1-NNNN motor use?
A: The encoder interface on this motor uses the Hiperface protocol, which allows for accurate feedback communication.
Q: What type of shaft configuration does the MSK060C-0300-NN-S1-UP1-NNNN feature?
A: The shaft on the MSK060C-0300-NN-S1-UP1-NNNN is designed with a keyway for secure attachment to mechanical loads.
Q: How flexible is the encoder connector on the MSK060C-0300-NN-S1-UP1-NNNN?
A: This motor is equipped with a rotatable encoder connector that can rotate 240 degrees, providing flexible installation options.
