Product Description:

The MSK060C-0300-NN-S1-UP0-NSNN servo motor is produced by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. It converts torque commands from an IndraDrive inverter into controlled rotary motion used in automated packaging stations, pick-and-place modules, and general handling axes. The combination of winding code 0300, frame size 060, and the C length variant gives the motor a balanced relationship between continuous torque, rotor inertia, and installation depth, making it suitable for mid-range machine frames that require repeatable motion and compact mounting.

Its cooling relies on natural convection, so heat is carried away through the motor housing without fans or liquid channels. The enclosure carries an IP65 rating, which keeps out dust and resists low-pressure water jets, allowing installation close to washdown areas on processing lines. Position feedback is delivered through a Hiperface interface, and the optical encoder produces 128 signal periods per mechanical revolution so the drive can interpolate finer resolution for smooth speed regulation and stable commutation. Because the sensing principle is optical, the feedback signal remains resistant to magnetic stray fields that may be present near large inductive loads.

The encoder is single-turn, so absolute position is retained within one mechanical revolution, which is suitable for axes that return to a reference point at startup. An ambient operating range of 0–40 °C matches typical factory conditions, and insulation class 155 allows the winding system to tolerate elevated internal temperature during normal duty. Mechanical output is transmitted through a shaft with a keyway, while the cable connection uses a rotatable 240° flange connector that allows several exit directions for easier routing in tight machine spaces. The motor is supplied without a holding brake, so the axis must rely on external locking or drive-generated torque when power is removed.