MSK060C-0300-NN-S1-UG1-NNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911307212
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
40 Seconds
The Bosch Rexroth Indramat MSK060C-0300-NN-S1-UG1-NNNN is a synchronous servomotor from the MSK IndraDyn S Synchronous Motors series with natural convection cooling, standard design, and a size 060 in length C. It is equipped with a plain shaft, rotatable encoder connector at 240 degrees, and features a Hiperface optical singleturn encoder with 128 signal periods. The motor includes an electrically-released holding brake providing 10 Nm of torque.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MSK060C-0300-NN-S1-UG1-NNNN is a synchronous servo motor from the MSK IndraDyn S Synchronous Motors series. It converts drive current into precise rotary motion for positioning axes and continuous-duty automation tasks, and its compact housing supports direct coupling to gearboxes or driven loads. The motor is used in packaging lines, pick-and-place units, and material-handling equipment where closed-loop speed control and repeatable positioning are required. This operating role helps the drive correct load changes quickly so motion remains consistent during indexing, transfer, and synchronized machine cycles. It uses frame size 060 with winding code 0300, which matches the electrical setup used by compatible drives in this motor family.
Heat is removed through natural convection, so the motor does not need a forced-air or liquid cooling circuit. This cooling method keeps the installation simple, but the housing still needs open space around it so heat can leave the surface during continuous operation. Feedback is transmitted through a Hiperface interface, which carries position data and initialization information between the encoder and the drive. Because the feedback system is integrated into the motor, the drive receives rotor position data directly from the encoder during operation. The encoder uses optical scanning and operates as a single-turn unit with 128 signal periods per mechanical revolution, supporting steady low-speed behavior and accurate speed regulation.
An electrically released holding brake provides 10 Nm of static torque so the shaft can remain in place after power is removed. That brake function is useful on vertical or suspended axes that must resist movement when the drive is disabled. The encoder connector is rotatable through 240°, which makes cable routing easier when the motor is installed in tight machine spaces or near fixed panels. The motor also uses a plain shaft without a key, allowing torque transmission through precision clamping hubs instead of a keyed connection. The C-length housing keeps axial space moderate for compact machine designs.
Frequently Asked Questions about MSK060C-0300-NN-S1-UG1-NNNN:
Q: How is the MSK060C-0300-NN-S1-UG1-NNNN motor cooled?
A: This model uses natural convection for cooling, operating without external fans or forced ventilation.
Q: Does the MSK060C-0300-NN-S1-UG1-NNNN motor come with a holding brake?
A: The MSK060C-0300-NN-S1-UG1-NNNN includes an electrically-released holding brake with a holding torque of 10 Nm.
Q: What type of shaft is featured on the MSK060C-0300-NN-S1-UG1-NNNN motor?
A: This motor is equipped with a plain shaft design, providing a smooth interface for coupling.
Q: What encoder technology does the MSK060C-0300-NN-S1-UG1-NNNN use?
A: The encoder interface on this model is Hiperface, with an optical singleturn encoder and 128 signal periods.
Q: What is the adjustment range of the encoder connector on this MSK060C-0300-NN-S1-UG1-NNNN motor?
A: The encoder connector can be rotated up to 240°, allowing flexible installation orientations.
