Product Description:

The MSK060C-0300-NN-S1-UG0-NNNN is a synchronous servomotor produced by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. It delivers regulated rotary motion in industrial automation, coupling with electronic drives to position tooling, conveyors, or pick-and-place arms with high accuracy. By integrating electronic feedback and a compact electromagnetic design, the motor acts as the primary torque source on axes that demand repeatable cycles and fast acceleration. A standardized mounting interface simplifies installation inside machinery enclosures where space is limited.

The unit dissipates heat through natural convection, so airflow around the housing must remain unobstructed during installation. Position feedback travels over the Hiperface protocol, allowing the drive to read absolute angle data and motor parameters. The encoder provides a resolution of 128 signal periods, which supports fine velocity control at low speed after interpolation in the drive. The scanning method inside the encoder is optical, yielding stable signals over a long service life. A service connector that is rotatable through 240° lets the cable exit be aligned toward the cabinet or along the axis, reducing strain in tight layouts.

The feedback module is a single-turn device, providing an absolute position within one revolution. Mechanical power is transmitted by a plain shaft, making the motor suitable for couplings or belt pulleys that rely on a friction fit. The 060 frame size with length class C gives the motor a compact housing and a torque range appropriate for this series. Winding code 0300 sets the electrical characteristics used by the matching drive. The design is standard, and the motor is supplied without a holding brake, so external means must secure vertical loads when power is removed.