MSK060C-0300-NN-M1-UG0-NSNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911373535
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
43 Seconds
The Bosch Rexroth Indramat MSK060C-0300-NN-M1-UG0-NSNN is an IndraDyn S Synchronous Servomotor in the MSK IndraDyn S Synchronous Motors series. This servomotor has natural convection cooling and an IP65 protection rating. Its encoder uses Hiperface technology with 128 signal periods and multiturn absolute operation, and the shaft is a plain type.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MSK060C-0300-NN-M1-UG0-NSNN is an IndraDyn S synchronous servomotor in the MSK IndraDyn S Synchronous Motors series produced by Bosch Rexroth Indramat. Designed for numerically controlled machines and automated assembly lines, the unit converts drive current into tightly regulated rotary motion, allowing precise acceleration, speed holding, and positioning under closed-loop control. It is commonly used on feed axes, handling units, and indexing mechanisms where short settling time matters. Closed-loop operation helps the system maintain commanded speed and position when load conditions change during the cycle.
Mechanically, the motor uses the 060 frame with length code C to maintain a compact profile while providing adequate torque reserve. The stator winding code 0300 indicates the electrical resistance and inductance values used by its matching amplifier. Position feedback is generated by an optical multi-turn encoder that delivers 128 signal periods per mechanical revolution and communicates through the Hiperface interface. The encoder supports precise electronic commutation and position evaluation throughout the operating range. A plain shaft simplifies coupling to clamp hubs or timing pulleys without introducing keyway stress concentrations, and this shaft style suits direct clamping arrangements where smooth hub alignment is preferred. The housing carries an IP65 rating.
Heat is removed by natural convection, enabling sealed installation without forced airflow. A rotatable connector that turns through 240° aids cable exit management when space behind the machine panel is limited. This connector arrangement is useful where nearby guards, panels, or cable tracks restrict a straight rear cable exit. Continuous operation is supported between 0–40 °C, and Class 155 insulation helps protect the windings from thermal aging at the upper end of that range. Because the motor is supplied without a holding brake, static loads must be restrained by the drive or external mechanics when the axis is at rest.
Frequently Asked Questions about MSK060C-0300-NN-M1-UG0-NSNN:
Q: What cooling method is used in the MSK060C-0300-NN-M1-UG0-NSNN servomotor?
A: The MSK060C-0300-NN-M1-UG0-NSNN motor is cooled by natural convection, allowing it to operate without external cooling fans.
Q: What type of encoder and interface does the MSK060C-0300-NN-M1-UG0-NSNN motor use?
A: This model uses a multiturn absolute optical encoder with Hiperface protocol and 128 signal periods for precise feedback.
Q: What kind of shaft does the MSK060C-0300-NN-M1-UG0-NSNN servomotor have?
A: The shaft on the MSK060C-0300-NN-M1-UG0-NSNN is a plain shaft, suitable for direct coupling to other mechanical components.
Q: Is there a holding brake included on the MSK060C-0300-NN-M1-UG0-NSNN motor?
A: This MSK IndraDyn S motor does not come equipped with a holding brake.
Q: What is the protection rating of the MSK060C-0300-NN-M1-UG0-NSNN motor?
A: The MSK060C-0300-NN-M1-UG0-NSNN has a protection rating of IP65, offering dust tightness and protection against water jets.
