MSK060B-0600-NN-S2-UG0-RNNN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911306634
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The MSK060B-0600-NN-S2-UG0-RNNN is manufactured by Rexroth Indramat Bosch as part of the MSK Servo Motor Series. It features a continuous torque of 5.5 Nm and a continuous current of 6.7 A. It also displays a maximum torque of 15.0 Nmand a maximum current of 24.4 A and a winding inductive of 18,000 mH
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Bosch Rexroth MSK060B-0600-NN-S2-UG0-RNNN synchronous servomotor features a 240° rotatable connector. The motor has increased run-out and concentricity as per DIN 42955 specifications. The product utilizes a single turn absolute EnDat 2.1 encoder. This encoder has one distinguishable revolution and 2,048 signal periods. The synchronous motor depicts a sound pressure level of less than 75dBA. The product has a B5 size frame as per EN 60034-7 specifications. The device incorporates an output shaft with a cylindrical shaft end and a centering hole that is in adherence to DIN 332, Part 2 specifications. Its thermal coupling to the machine in which it is installed changes if the unit is fitted with transmissions.
This servomotor portrays the risk of explosion hazard if it is handled improperly during the connection process. The motor is designed to be connected with a readymade encoder and power cables offered by the manufacturer. The service life of these cables depends on the environmental influences where the product is used and its installation position. The device can function with rated data when it is installed at an altitude between 0m and 1,000m over sea level according to DIN EN 60034-1 specification. The unit experiences a temperature change rate of 0.5°C/min during use. This MSK060B-0600-NN-S2-UG0-RNNN motor is available with a year’s Wake Industrial warranty for dispatch to any country.
This product supports a maximum permitted radial shock load of 500m/s2 for 11ms. The device has IP 65 degrees of protection for its output shaft and housing. The unit depicts the danger of explosion if its surface characteristics are changed improperly. It is designed with a radial shaft sealing ring as per DIN 3760 – version A specifications. This sealing ring functions like an abrasive seal that is greased for life under ambient and normal conditions. The shaft seal and output shaft should not have direct contact with the machining medium as far as possible.
