MSK060B-0600-NN-M2-UG1-RNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911306646
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
13 Seconds
The Bosch Rexroth Indramat MSK060B-0600-NN-M2-UG1-RNNN is an IndraDyn S Synchronous Servomotor from the MSK IndraDyn S Synchronous Motors series. It features a natural convection cooling system, plain shaft, and IP65 protection rating. The motor comes with an EnDat2.1 optical multiturn absolute encoder and an electrically-released holding brake with 10 Nm torque.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MSK060B-0600-NN-M2-UG1-RNNN is a synchronous servomotor produced by Bosch Rexroth Indramat as part of the MSK IndraDyn S Synchronous Motors series. Within the 060 frame class and B length code, the unit fits compact multi-axis machines while its increased concentricity design helps minimize shaft runout during precise motion. This arrangement supports repeatable rotary output in packaging lines, assembly robots, and other automated stations where accurate positioning and steady cycle timing are important. Its compact size also makes it suitable for installations where available mounting space is limited but responsive servo performance is still required.
Cooling through natural convection lets the housing fins release heat without fans, reducing cabinet complexity while keeping the windings within their temperature limit. The optical feedback system communicates over EnDat2.1, a bidirectional digital link that carries absolute position data and diagnostics on one cable. Position resolution comes from an internal scale of 2048 signal periods, which the controller can interpolate for fine motion control. An electrically released holding brake rated for 10 Nm helps prevent unwanted movement when power is removed, and external sealing to IP65 helps keep dust out and deflect low-pressure water jets on factory floors.
The motor operates without derating between 0–40 °C, matching common shop-floor temperatures. It uses a plain shaft, which works well with clamping couplings and similar drive elements. Insulation Class 155 permits winding temperatures up to 155 °C for reliable thermal endurance, and winding code 0600 sets the resistance and inductance used by the B-length stator. Multi-turn absolute measurement, optical sensing technology, and a rotatable 240° encoder connector support flexible cable routing while preserving position data across power cycles, which helps the motor remain suitable for repeatable axis movement in automated equipment.
Frequently Asked Questions about MSK060B-0600-NN-M2-UG1-RNNN:
Q: What encoder type and technology are featured in the MSK060B-0600-NN-M2-UG1-RNNN motor?
A: The MSK060B-0600-NN-M2-UG1-RNNN uses a multiturn absolute optical encoder with EnDat2.1 interface for precise position feedback.
Q: How is the MSK060B-0600-NN-M2-UG1-RNNN motor cooled during operation?
A: This model operates with natural convection cooling, dispersing heat without external cooling systems.
Q: Does the MSK060B-0600-NN-M2-UG1-RNNN motor include a holding brake, and what is its torque?
A: The MSK060B-0600-NN-M2-UG1-RNNN comes with an electrically-released holding brake featuring a holding torque of 10 Nm.
Q: What level of environmental protection does the MSK060B-0600-NN-M2-UG1-RNNN offer?
A: The motor is protected by an IP65 rating for resistance to dust and water ingress.
Q: What type of shaft is utilized in the MSK060B-0600-NN-M2-UG1-RNNN servo motor?
A: The MSK060B-0600-NN-M2-UG1-RNNN uses a plain shaft design for its mechanical output.
