Product Description:

The MSK050C-0600-NN-S2-UP1-RNNN is an IndraDyn S synchronous servomotor produced by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. Within an industrial automation cell, the unit converts controlled drive current into mechanical rotation so actuators, gantries, or conveyor modules can follow commanded positions and speeds with high accuracy. Its synchronous servo design supports responsive acceleration, stable speed regulation, and repeatable positioning in compact machine assemblies. Because the motor operates in closed-loop motion systems, it is suited for transfer, indexing, and handling tasks that depend on coordinated axis movement.

Heat generated by the stator is released through natural convection, eliminating the need for external fans or liquid circuits. A housing with an IP65 rating blocks dust and low-pressure water jets, allowing mounting near the machine bed in many installations. Position feedback comes from an EnDat2.1 optical encoder that provides 2048 signal periods per revolution. Its optical scanning principle supports fine interpolation and low jitter, while the single-turn format supplies absolute position within one mechanical turn after power-up. The motor has size 050, length C, and winding code 0600, and the increased concentricity design helps minimize runout at the keyway shaft during rotary motion.

Load securing is handled by an electrically released holding brake rated at 6 Nm, providing static torque when power is removed from the drive. The encoder connector can be rotated through 240° without tools, which gives more freedom when routing feedback cables in tight machine spaces and along moving cable paths. Continuous duty is permitted at ambient temperatures from 0 to 40 °C, keeping thermal rise within insulation class 155. This operating range suits axes that alternate between standstill holding and repeated motion cycles in packaging, pick-and-place, and similar automated equipment.