Product Description

The Bosch Rexroth MSK050C-0600-NN-M3-UP0-NNNN is an advanced servo motor. It is a synchronous motor that has a rotation speed that is synchronized to the frequency of the supply current. The power to the motor is supplied by a drive controller. The controller receives feedback from the motor encoder and adjusts its output to keep the motor parameters as close as possible to the desired or configured motor parameters. The MSK050C-0600-NN-M3-UP0-NNNN features an integrated capacitive multiturn encoder. The encoder supports Hiperface and is rated for 16 signal periods. The MSK050C-0600-NN-M3-UP0-NNNN has a standard design and cools via natural convection. The ambient temperature recommended for motor operation is 0 to 40 degrees Celsius. The motor output derates above 40 degrees Celsius. Operation of the motor at temperatures that are higher than 55 degrees Celsius is not recommended.

The range of altitudes over which the MSK050C-0600-NN-M3-UP0-NNNN motor performs as per rated specifications is 0 to 1000 meters. The motor output derates at altitudes that are higher than 1000 meters. Operation of the motor at altitudes that exceed 3000 meters is not recommended. The respective load factors have to be multiplied if both the temperature and altitude exceed the recommended ranges at the same time. The shaft on the MSK050C-0600-NN-M3-UP0-NNNN includes a keyway and a sealing ring. the shaft key allows firm-locking transmission of torques with constant direction and low requirements for the shaft-hub connection. As MSK motor are balanced with a full key, the machine element that the motor drives has to be balanced without a key. The connectors on the MSK050C-0600-NN-M3-UP0-NNNN are 240-degree rotatable. The motor does not include a holding brake. The maximum motor speed is 6000 RPM.