MSK050C-0600-NN-M1-UG0-NSNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911336380
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
6 Seconds
The Bosch Rexroth Indramat MSK050C-0600-NN-M1-UG0-NSNN is part of the MSK IndraDyn S Synchronous Motors series and features natural convection cooling, with a thermal insulation class of 155. This servomotor uses a multiturn absolute optical encoder with Hiperface interface and a resolution of 128 signal periods. It is designed for both standard and explosion protection and has a protection rating of IP65.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MSK050C-0600-NN-M1-UG0-NSNN is a servomotor produced by Bosch Rexroth Indramat within the MSK IndraDyn S Synchronous Motors series. Identified by size 050, length code C, and winding code 0600, it belongs to the Standard and Explosion Protection design group. A plain shaft interface carries drive torque directly to the machine load, enabling the motor to position axes with high repeatability in packaging lines, gantry stages, and metal-cutting systems. Its synchronous design supports controlled acceleration and stable speed regulation in axes that must respond quickly to changing commands. This makes the unit suitable for automated equipment that needs repeatable positioning over short cycle times and frequent reversals.
In operation, stator heat is removed by natural convection, so the motor can be mounted without external fans when ambient airflow is available. A housing with an IP65 rating prevents dust ingress and guards against low-pressure water jets, permitting installation close to the working process. Position feedback comes from an internal encoder that relies on optical scanning and produces 128 signal periods per revolution, which suits mid-range accuracy tasks while minimizing data traffic. The encoder communicates through the Hiperface protocol, which supports synchronous data and power transmission over a single hybrid cable. Single-cable feedback transmission also reduces the amount of separate wiring between the motor and the drive. Insulation system class 155 permits the winding temperature rise used for continuous duty.
Installation flexibility is extended by a connector that can be turned 240°, allowing cable exits to be aligned with cabinet layouts or moving carriers. That arrangement can simplify cable routing in compact machine frames. The integrated sensor is multiturn absolute, so the drive receives shaft angle information immediately after power-up and can resume motion without a reference run. The motor is delivered without a holding brake, making it suitable for axes where the drive or an external clamp secures static loads. Continuous operation is specified within an ambient range of 0–40 °C, providing a clear temperature window for normal indoor use.
Frequently Asked Questions about MSK050C-0600-NN-M1-UG0-NSNN:
Q: What type of encoder does the MSK050C-0600-NN-M1-UG0-NSNN motor have?
A: The MSK050C-0600-NN-M1-UG0-NSNN motor uses an optical multiturn absolute encoder with Hiperface interface and 128 signal periods of resolution.
Q: How is the MSK050C-0600-NN-M1-UG0-NSNN motor cooled?
A: This model operates using natural convection for cooling and does not require external forced air or liquid cooling systems.
Q: What level of protection does the MSK050C-0600-NN-M1-UG0-NSNN motor offer?
A: The MSK050C-0600-NN-M1-UG0-NSNN is protected to an IP65 rating, making it resistant to dust and water jets from any direction.
Q: What is the allowable ambient temperature range for using the MSK050C-0600-NN-M1-UG0-NSNN motor?
A: The operating ambient temperature range for this motor is 0 to 40°C, ensuring reliable performance in typical industrial environments.
Q: Does the MSK050C-0600-NN-M1-UG0-NSNN come with a holding brake?
A: This version is manufactured without a holding brake, so additional components are needed if a shaft holding function is required.
