Product Description:

The Bosch Rexroth Indramat MSK050C-0600-NN-M1-BG0-NNNN is a synchronous servo motor in the MSK IndraDyn S Synchronous Motors series. In automated machinery, it converts drive current into regulated torque and position for axes such as pick-and-place heads, packaging mandrels, or small conveyor sections. It is supplied as a standard design variant intended for cabinet-free installation, where sealed motion devices can simplify system layout and wiring. Its compact format also suits machine layouts that place the motor close to the working area without adding a separate protective enclosure.

For thermal management, the motor relies on natural convection, so heat dissipates through the housing without external fans or liquid circuits. Feedback is transferred over the Hiperface serial bus, and the optical reader tracks 128 signal periods per revolution to provide fine incremental data. Because the sensor is optical, it is not affected by magnetic stray fields commonly found around power cables. Absolute position over multiple turns is preserved by a multi-turn absolute encoder that retains count after power loss. The housing has an IP65 rating, which helps keep dust and low-pressure water jets away from internal components during routine washdowns.

The motor uses length code C, which pairs the 050 frame with a mid-range stack for balanced inertia, and a B-side power connector helps simplify routing inside chain carriers that run parallel to the rear face. The rotor exits the housing as a plain shaft, allowing the use of external clamping or keyed hubs selected for the application. The motor is supplied without a holding brake, so load retention must be handled by the drive or by external mechanical components when the axis is stopped. Continuous duty is supported within an ambient range of 0–40 °C, and the windings use Class 155 insulation materials to match common servo-drive protection behavior. Winding code 0600 sets the electrical characteristics expected by compatible IndraDrive amplifiers.