Product Description:

The MSK050C-0300-NN-S1-UP1-NSNN is an IndraDyn S synchronous servomotor manufactured by Bosch Rexroth Indramat and supplied as part of the MSK IndraDyn S Synchronous Motors series. This product combines a size 050 stator, a C-length housing, and winding code 0300 to generate precise electromechanical power for indexing tables, gantry axes, and other automated motion stations where repeatable speed and position are required. Its synchronous motor design allows the drive to regulate torque smoothly during acceleration, constant-speed operation, and short positioning moves. Output torque is transmitted through a shaft with a keyway, supporting rigid coupling to pulleys, gearboxes, or belt drives without relying only on friction fits.

The stator is cooled by natural convection, so heat is carried away through the housing surface without auxiliary fans or liquid circuits. Position feedback relies on a Hiperface interface that streams digital angle data to the drive controller while maintaining analog commutation tracks. Inside the encoder module, the base resolution is 128 signal periods per mechanical turn. The measuring principle is optical, giving stable phase accuracy and low jitter across the full operating temperature range. For controlled deceleration and load holding during power-off, an electrically released brake applies 6 Nm of static torque, preventing drivetrain movement until current is restored.

The feedback plug is rotatable through 240°, allowing the cable to exit in multiple directions to reduce bend stress inside tight cabinets. The mechanical build follows a standard design with explosion protection, so the motor can be used in ordinary or classified zones when paired with a suitable drive. Encoder evaluation uses a single-turn track that reports absolute position within one revolution, while multi-turn data can be handled by the motion controller if required. The cable outlet can be aligned to suit cabinet routing or machine-side clearances, which helps keep the feedback connection compact around nearby guards and mounting surfaces.