Product Description:

The MSK050B-0600-NN-S3-UG0-NNNN belongs to the MSK IndraDyn S Synchronous Motors series produced by Bosch Rexroth Indramat. As a servo motor, it converts electrical commands into controlled rotary motion for positioning tasks in packaging lines, pick-and-place gantries, and other automated stations. The unit combines feedback and power interfaces in a compact housing, which helps reduce external hardware near the driven axis. This arrangement supports closed-loop operation with a straightforward cable layout. Its housing is suitable for general indoor machinery where protected installation conditions are available.

For thermal management, the motor relies on natural convection, so airflow around the housing must remain unobstructed during operation. Feedback data reach the controller through the Hiperface interface, which carries position data and motor-specific parameters over shielded conductors. The encoder provides 16 signal periods and uses capacitive sensing, which is less sensitive to contamination than optical scanning. Because the feedback system is single-turn, it reports position within one mechanical revolution and the drive tracks additional revolutions. A rotatable 240° encoder connector also helps route cables cleanly in compact machine layouts.

The motor is supplied without a holding brake, so any static load must be secured by drive torque or by an external holding device. A plain shaft supports direct coupling to gearboxes or timing pulleys where a keyed connection is not required. This shaft style also works well with clamp couplings that need a smooth contact surface. The 050 frame size suits compact axes, and motor length B gives the housing a moderate stack length for its frame size. The 0600 winding code indicates the electrical winding used with compatible drive amplifiers.