In the modern industrial world, synchronous motors have almost completely replaced capacitors for power factor corrections. It is extremely important for any synchronous motor to operate in a variety of load conditions without disrupting the overall operation of the plant. The MSK050B-0300-NN-S2-UG0-RNNN is a futuristic addition in the line of servo motors by Bosch Rexroth. It comes equipped with several features that have even eliminated the common disadvantages all synchronous motors used to have. The modern and high performing electrical commutations of the motor allow it to continuously start and stop at high frequencies, startup automatically, prevents any failure due to overloading and overcharging, utilize peak torque at a wide speed range, etc.
The MSK050B-0300-NN-S2-UG0-RNNN is designed to act as a versatile addition to a number of industrial setups; therefore it does not come with industry-specific features. However, its reliability and unique operating parameters allow it to be used in any industrial environment. For example, the motor comes in an IP 65 certified housing that does not let any liquid to reach the internal electric circuits of the motor. This is extremely important for the process sector as chances of accidental spills are quite high. Similarly, the intelligent design of the MSK050B-0300-NN-S2-UG0-RNNN carries out heat transfer through natural convection and surface cooling method, allowing the motor to be used in areas with high ambient temperature. Moreover, the motor can perform splendidly in elevated areas and shows absolutely no difference in operations up to an elevation of 1000 m above sea level.
The MSK050B-0300-NN-S2-UG0-RNNN maintains its closed loop feedback system with an optical encoder. It comes with a rotatable electrical connector but with no holding brakes. The standard shaft comes with strong sealing rings to minimize the effect of vibration and ensure that no internal leakages occur. All of these features are packed in a DIN 42955 approved robust housing designed to last a long time.
|Other Design:||Reduced shaft run-out, axial run-out according to DIN 42955|
|Cooling Mode:||Natural Convection|
|Encoder:||Optical encoder, singleturn EnDat2.1, with 2048 increments|
|Electrical Connection:||Plug, rotatable 240 degrees|
|Shaft:||Plain shaft with shaft sealing ring (standard)|
|Holding Brake:||Without holding brake|
Wake Industrial sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed. Wake Industrial is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.
Copyright 2020 - Wake Industrial - All Rights Reserved