Product Description:

The MSK043C-0600-NN-M1-UP1-NNNN servo motor is manufactured by Bosch Rexroth Indramat within the MSK IndraDyn S Synchronous Motors series. Designed for closed-loop automation, it supplies controlled torque and speed to match motion profiles in cutting, packaging, and pick-and-place stations. Integrated position feedback allows the connected drive to align electrical commutation with mechanical motion for repeatable axis performance during cyclic operation. This arrangement supports precise starts, stops, and directional changes in machines that depend on stable servo response.

Heat is removed by natural convection, so the motor relies on surface area and surrounding airflow rather than forced ventilation. The optical multi-turn encoder uses 128 signal periods per mechanical revolution to generate incremental feedback data, and it communicates through the Hiperface interface on a rotatable 240° connector that helps route the cable in tight machine spaces. An electrically released holding brake supplies 4 Nm of static torque to hold a load when motion is stopped or power is removed. The motor is sealed to IP65, which helps keep dust and water jets away from internal components. The 0600 winding and C length code indicate the electrical and mechanical configuration used for this version.

The motor operates at ambient temperatures from 0 to 40 °C, which matches typical industrial indoor conditions. Torque is transmitted through a shaft with keyway, providing positive engagement with a coupling or hub during reversing duty. Thermal endurance is supported by insulation class 155, which permits elevated winding temperatures within the insulation system limit. Frame code 043 identifies the motor size used for this housing and mounting format. The standard housing layout keeps the unit compact for machine axes with limited installation space.