Product Description:

The MSK040C-0600-NN-S3-UP1-NNNN is an IndraDyn S synchronous servomotor produced by Bosch Rexroth Indramat and assigned to the MSK IndraDyn S Synchronous Motors series. As a permanent-magnet, electronically commutated unit, it converts drive current from a matching servo inverter into mechanical shaft power for positioning and velocity control in automated assembly lines, material handling systems, small gantry modules, and similar motion equipment. It is suited for axes that require accurate starts, stops, and speed changes within a compact motor package. When paired with the proper drive, the motor supports closed-loop operation for repeatable rotary motion during indexing and transfer tasks.

The motor uses natural convection cooling, so heat is dissipated through the aluminum housing without an external blower. Its IP65 enclosure helps block dust and low-pressure water jets, which allows installation outside sealed cabinets when the rest of the system is arranged for it. During power-off, an electrically released brake provides 4 Nm of holding torque to secure vertical loads or hold a stopped axis in place. Position feedback is exchanged over the Hiperface interface, and the single-turn encoder uses capacitive scanning with 16 signal periods for stable feedback in electrically noisy environments. The 0600 winding code, insulation class 155, motor length C, and standard housing identify the motor's electrical and mechanical configuration for compatible servo systems.

The feedback connector is rotatable through 240°, which allows cable routing to be adjusted to suit the surrounding machine layout. The compact frame size 040 helps the motor fit tight mounting spaces on smaller axes where installation depth is limited. Continuous operation is permitted from 0 to 40 °C, matching typical industrial ambient conditions. Torque is transmitted through a shaft with a keyway, allowing positive mechanical engagement with compatible couplings, pulleys, or other drive elements.