Product Description:

The MSK040C-0600-NN-S2-UP0-NNNN servo motor belongs to the MSK IndraDyn S Synchronous Motors series from Bosch Rexroth Indramat. This standard-design unit is intended for closed-loop motion axes where compact size, low maintenance, and accurate feedback are required. It converts electrical commands into controlled rotary force for gear stages, conveyor rollers, and direct-coupled mechanical loads in automated machinery. Its integrated feedback system allows the drive to monitor rotor position continuously, which supports smooth speed regulation and repeatable stopping accuracy during frequent start-stop cycles. The compact C-length housing helps the motor fit installations where available axial space is limited, including tightly packed transfer systems and small machine modules.

Thermal management relies on natural convection, so the motor should be installed where air can move freely around the housing. Position data are delivered by an optical encoder with 2048 signal periods, and this information is exchanged with the drive over the EnDat2.1 serial interface for precise digital commutation and stable closed-loop response. The housing has an IP65 rating, which helps protect internal components in dusty or splash-prone areas. Continuous service is permitted at ambient temperatures from 0 to 40 °C, making the unit suitable for many standard industrial environments without auxiliary cooling equipment. Because cooling is passive, the motor can be used in layouts that avoid separate fan maintenance and additional wiring.

The output end uses a shaft with keyway, which simplifies torque transfer to standard pulleys, hubs, or flexible couplings. The motor is supplied without a holding brake, so the axis must rely on an external braking device or controlled drive torque when power is removed. The motor has frame size 040, and the winding insulation is rated to class 155. The encoder connector can be rotated by 240° to support cable routing in confined machine layouts, and winding code 0600 identifies the electrical characteristics used with compatible drives and motor cables. This arrangement is useful in compact equipment where cable exit direction and coupling style need to match neighboring components without adding adapters.