Product Description:

The MSK040C-0600-NN-S1-UP0-NSNN is a servo motor built by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. As an IndraDyn S synchronous servomotor, it converts electrical energy from a drive into precisely controlled rotary motion for positioning axes, packaging machinery, and pick-and-place equipment. Its compact 040 frame size and C-length stator allow it to fit tight mechanical spaces while still delivering the controlled motion expected in factory automation. The motor is intended for applications that need accurate speed regulation, repeatable positioning, and a compact installation footprint.

This motor relies on natural convection for thermal management, so heat dissipates through the housing without forced air or liquid cooling. Signal feedback to the drive is delivered by the Hiperface protocol, which carries position data and electronic motor information over a compact feedback link. Internal interpolation is based on 128 signal periods, supporting smooth velocity control and stable position feedback. The output uses a shaft with a keyway, which provides secure torque transmission to couplings or pulleys. The unit is supplied without a holding brake, so any load that must remain fixed during power-off conditions requires an external holding method.

The motor uses the Standard and Explosion Protection design option, making it suitable for standard installations and applications that require this protection concept. Electrical connections are supported by a rotatable 240° encoder connector, allowing the cable exit to be adjusted after installation to reduce strain in confined spaces. Position sensing uses optical scanning, which supports accurate feedback and stable signal quality. The feedback system is a single-turn design, so it reports the absolute shaft angle within one mechanical revolution. This arrangement is well suited to applications that need precise startup position data without multi-turn tracking.