Product Description:

The MSK040C-0600-NN-M3-UP0-NNNN is a servo motor produced by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. Intended for closed-loop industrial automation, the unit translates commanded drive currents into precise rotary motion for packaging, pick-and-place, and indexing axes. Its compact form pairs directly with IndraDrive controllers and provides continuous position feedback through an integrated encoder. This arrangement supports accurate starts, stops, and speed changes in compact machine sections where available installation space is limited.

Natural convection is the primary thermal path, so the motor dissipates heat without external blowers or liquid channels. A rotatable 240° encoder connector simplifies cable routing in tight cabinets and allows better strain-relief alignment after installation. Position data travel over the Hiperface digital interface, while the internal sensor provides 16 signal periods per mechanical revolution for common velocity and position loops. The motor uses winding code 0600, which matches the coil impedance and rated current expected by compatible IndraDrive controllers. A shaft with a keyway transmits torque directly to couplings, and the unit is supplied without a holding brake, so load securing must be handled mechanically or by drive torque.

The frame size 040 gives the motor a housing diameter suited to light and medium servo axes, while length code C extends the magnetic stack to raise continuous torque without enlarging the cross-section. Standard construction keeps the mounting interfaces consistent with other motors in the series, which helps the motor fit common machine layouts. Feedback durability comes from the Capacitive scanning principle, which resists dust, oil, and vibration better than optical disks in demanding industrial environments. The encoder also has multi-turn absolute capability, so revolution data remains available after power is removed and the axis can return with stored turn information.