MSK040C-0450-NN-M3-UG1-NNNN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911339385
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The MSK040C-0450-NN-M3-UG1-NNNN is a synchronous servo motor built by Bosch Rexroth Indramat. The motor contains a capacitive multiturn encoder and an electrically released holding brake. It can support high loads, and can reach a peak speed of 6000 revolutions per minute.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth is a manufacturer of drive control products and automation systems.
The MSK040C-0450-NN-M3-UG1-NNNN is a synchronous motor that has been designed for industrial automation products. This model has been manufactured for a wide range of motion control applications and is often used in areas where there is limited installation space but the torque requirement is significantly high. Owing to the use of high quality permanent magnets, this motor is able to generate a high torque density that is needed for producing high torque with a small mass. This model’s operational range is better than many servo motors. This model’s continuous torque at standstill mode is 2.7 Nm and its continuous current at the same temperature is 2.4 A. The motor is also operated at an overtemperature of 100 K where its continuous torque maximum torque is 8.1 Nm. This model has a maximum current of 9.6 A.
The MSK040C-0450-NN-M3-UG1-NNNN has a maximum velocity of 6000 rpm and its sound pressure level is less than 75 db(A). This motor has four pole pairs that have a weight of 3.6 kg. The motor can be safely used in areas that have an ambient temperature between 0 °C and 40 °C. This model’s outer enclosure has an IP 65 grade ingress protection that is sufficient for protecting the motor’s circuitry against the penetration of water jets. The motor’s rotor moment of inertia is very low that is needed for dynamic loading conditions. This model has a discharge capacity of 2 nF and its thermal time constant is 16 mins. The system has a torque constant of 1.25 Nm/A and can maintain a constant torque output.
