Product Description

The MSK040B-0600-NN-S2-UP0-NNNN is a Bosch Rexroth MSK servo motor. MSK motors are characterized by a wide performance spectrum and fine size gradation. The high torque density enables a compact design with peak torque of up to 631 Nm. Different encoder versions are available in single-turn or multi-turn versions. MSK motors are designed with IP65 rated housings and come with an integrated temperature sensor. The IP65 rating ensures that the motor is protected from dust and water jets. This enables motor mounting outdoors and close to the operating machines, which helps to save space and cost as cabinets are avoided. The frame size of the MSK040B-0600-NN-S2-UP0-NNNN motor is 040, the winding code is 0600 and the motor length is B. The motor encoder is an optical encoder singleturn EnDat 2.1 with 2048 signal periods.

The MSK040B-0600-NN-S2-UP0-NNNN motor uses natural convection for cooling. Optimal motor performance is obtained at 0 to 40 degrees Celsius ambient temperatures. A holding brake is not supported but can be ordered separately as an option. The shaft on the MSK040B-0600-NN-S2-UP0-NNNN has a keyway and a sealing ring. The seal protects motor bearings from dust and moisture and extends their operating life span. The seal does however suffer from wear and should be inspected periodically and replaced if required. Power connector on the MSK040B-0600-NN-S2-UP0-NNNN can rotated by 240 degrees. Maximum speed rating of the MSK040B-0600-NN-S2-UP0-NNNN is 7500 RPM. The approximate motor weight is 2.8 kilograms. All personnel involved in motor installation and operation must read the product documentation before working on the motor. The safety instruction must be followed to prevent injury and damage to equipment. Damaged motors should not be installed or put into operation.