Product Description:

The MSK030C-0900-NN-S1-UG0-NSNN is a compact servo motor built by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. This motor converts electrical energy into precise rotary motion and is used in automated packaging lines, pick-and-place axes, and similar positioning tasks where closed-loop speed and torque control are required. It serves as a modular drive element that mounts directly to planetary gearboxes or ball screws and interfaces with IndraDrive controllers in multi-axis industrial automation cells. Its compact format suits machines where installation space is limited but accurate positioning still matters. When paired with a matching drive, it supports repeatable motion in short indexing moves and synchronized axis tasks.

The MSK030 frame size corresponds to a 54 mm stator diameter, and length code C extends the active stack to raise continuous torque without increasing width. A plain output shaft is fitted, and the housing meets IP65 protection so dust and low-pressure water jets do not reach internal components. Heat leaves the windings through natural convection, eliminating fans and simplifying machine layouts. Feedback is handled by an optical single-turn encoder with 128 signal periods per revolution, and its data stream uses the Hiperface serial interface for position and commutation information. The encoder plug can be turned through 240°, allowing cable routing to match cabinet orientation, and the motor is also certified for explosion-protected zones.

The winding code 0900 indicates the electrical variant used for this motor. Coil insulation is rated class 155, which supports high allowable winding temperatures before thermal derating is required. The permitted ambient operating range is 0–40 °C, and operation outside this window requires load reduction or additional cooling. The motor is supplied without a holding brake, which reduces inertia in high-cycle axes and keeps the rotating assembly simpler for dynamic motion.