Product Description:

The MSK030C-0900-NN-M1-UG0-NNC1 is an IndraDyn S synchronous servomotor manufactured by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. With its 030 frame size and C length, this permanent-magnet motor provides tightly regulated torque for small positioning axes in automated machinery. When paired with a compatible drive controller, it serves as the electromechanical actuator that turns control commands into motion, allowing production lines, packaging cells, and assembly stations to maintain repeatable speed and positional accuracy under closed-loop feedback.

Its cooling is handled by natural convection, so thermal energy leaves the housing through surface radiation and airflow without fans. Inside the motor, winding code 0900 sets the electrical resistance and inductance values used for moderate current ratings, while Class 155 insulation keeps conductor temperature within safe limits. Position data are provided by an encoder that combines Hiperface communication, 128 signal periods of internal resolution, and multi-turn absolute memory, giving the drive controller fine incremental counts and the ability to recover shaft position after a power cycle. The scanning method is optical, and the sensor is protected by an IP65 enclosure that blocks dust ingress and water jets during washdown procedures.

The feedback connector offers a rotatable 240° range, so the cable exit can be oriented after the motor is mounted. Output torque is transferred through a plain shaft, a smooth journal that mates with compression hubs or custom couplings. The unit is delivered without a holding brake, so static load retention must be provided by the drive or external mechanics. Rated operation is permitted from 0 to 40 °C, matching the temperature limits of typical machine enclosures.