Product Description:

The MSK030B-0900-NN-S1-UP0-NNNN is an IndraDyn S synchronous servomotor manufactured by Bosch Rexroth Indramat for precision axis control in industrial automation cells, pick-and-place modules, and compact tooling stations. As part of the MSK IndraDyn S Synchronous Motors series, this unit converts drive current into tightly regulated torque and speed so closed-loop controllers can position mechanical loads with high repeatability. Its compact format suits smaller motion axes where accurate response and stable control are required without adding unnecessary bulk to the machine.

The motor relies on natural convection cooling, so normal enclosure airflow removes winding heat without external blowers. Its mechanical output uses a shaft with a keyway, which helps transmit torque to couplings or pulleys without slip. Winding code 0900 identifies the coil impedance used with matching MSK drive outputs for rated current and voltage. The encoder system communicates through the Hiperface interface and uses optical scanning to send real-time rotor position data over synchronized channels. The motor is supplied without a holding brake, so static load retention must be provided by the drive or by external locking hardware.

The feedback connector is rotatable through 240°, so the plug can be turned within that arc to reduce cable stress in tight panels. Positional feedback is based on 128 signal periods per revolution, and the encoder is a single-turn type that measures one mechanical turn before the count repeats. Motor size code 030 keeps the flange envelope compact for use with miniature gearboxes and linear stages. The standard design variant and B length help the motor fit machines with limited installation depth. This layout supports compact axis assemblies where cable routing and available space are both restricted.