Product Description:

The MSK030B-0900-NN-M1-UP1-NNNN is an IndraDyn S synchronous servomotor made by Bosch Rexroth Indramat and assigned to the MSK IndraDyn S Synchronous Motors series. It converts electrical energy into regulated rotary motion for positioning tasks in automated assembly lines and other compact motion axes. The motor uses the 030 frame size and the B length variant, which gives it a small installation envelope for machines with limited mounting space. This combination supports direct use with compatible IndraDrive amplifiers and standard coupling hardware.

Heat dissipation relies on natural convection, so the housing sheds losses without fans or liquid circuits. The encoder plug sits on a rotatable 240° flange, which helps route the cable to suit the surrounding machine layout. Position data travels through the Hiperface interface, allowing the drive to process feedback for commutation and motion control. An optical sensing element inside the encoder produces 128 signal periods per shaft revolution, giving the drive a solid base signal for interpolation and stable low-speed operation. This feedback arrangement supports smooth velocity control and accurate incremental movement on axes that require repeatable positioning.

The measurement system provides Multiturn Absolute feedback, allowing the controller to retain shaft position information over multiple turns after power cycling. For static holding or emergency stops, the motor is equipped with an electrically released holding brake; when de-energized, the brake clamps the rotor and withstands up to 1 Nm of torque. Mechanical power is transmitted through a keyed shaft, which helps prevent slip during frequent reversing motion. Winding code 0900 indicates the conductor cross-section and turns ratio selected for nominal speed and voltage pairing with standard IndraDrive converters. This winding selection supports predictable electrical matching between the motor and the connected drive.