MSD151F-0016-FA-S2-BF3-16-A-M401 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911326461
The Bosch Rexroth Indramat MSD151F-0016-FA-S2-BF3-16-A-M401 is part of the MSD Permanent Magnet Motors series. This motor has a flange torque of 206 Nm and uses a flange socket for power connection. It operates in converter mode, with a maximum ambient temperature of 40°C and a maximum installation altitude of 1000 meters.
Internal Product Review
The MSD151F-0016-FA-S2-BF3-16-A-M401 is a Bosch Rexroth Indramat permanent magnet motor configured for converter mode with a flange socket power connection. Technical performance stands out with 206 Nm flange torque and stable operation across a 0 to 40 °C ambient range. Low acoustic output at 75 dB(A) supports clean machine integration, while 1000 m maximum installation altitude adds practical deployment flexibility.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MSD151F-0016-FA-S2-BF3-16-A-M401 is a permanent-magnet servo motor built by Bosch Rexroth Indramat and supplied within the MSD Permanent Magnet Motors series. It converts electrical energy from a converter into rotary motion so that automation axes can position loads with high repeatability and controlled acceleration. This frame size supports direct flange mounting to gearboxes or machine plates, making the motor suitable for packaging machines, material-handling gantries, and similar industrial equipment that requires precise torque delivery. Its permanent-magnet design supports responsive speed changes and accurate motion when paired with a compatible closed-loop drive system.
The motor develops a continuous flange torque of 206 Nm, allowing mechanical transmissions to be sized without excessive gear reduction. Shaft retention and accessory mounting rely on an M16 thread at the flange, which accommodates common clamping and pulling tools. Power conductors terminate through a flange socket, an arrangement that shortens cable loops and helps reduce electromagnetic noise. The permitted operating temperature extends up to 40 °C, so the motor can run at full load in typical plant environments without thermal derating. Direct flange attachment provides rigid alignment with the driven equipment and helps maintain stable torque transfer under changing loads.
The permitted ambient temperature range begins at 0 °C, enabling cold-start operation in unheated production areas within this limit. Installation sites can be located as high as 1000 m above sea level without additional thermal derating because air-density losses remain within the motor’s cooling limits at this altitude. During operation, airborne acoustic emissions remain below 75 dB(A), which helps facilities manage workplace noise without supplemental acoustic enclosures. Electrical excitation must be supplied in converter mode; this provides the sinusoidal current waveform and overcurrent protection required by a permanent-magnet synchronous motor. Closed-loop feedback from the connected drive allows the axis to regulate torque, speed, and position while responding to changes in the commanded motion profile.
