MSD130B-0150-NN-S1-UE0-05-N-M401 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MSD130B-0150-NN-S1-UE0-05-N-M401 is part of the MSD Permanent Magnet Motors series and uses a flange socket for its power connection. It features a 13 mm mounting hole diameter with M12 mounting screws and a flange tightening torque of 84 Nm. This motor supports operation up to 1000 meters altitude and can handle a maximum relative humidity of 95 percent.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MSD130B-0150-NN-S1-UE0-05-N-M401 is a permanent-magnet motor manufactured by Bosch Rexroth Indramat as part of the MSD Permanent Magnet Motors series. Paired with a variable V/F drive controller, this unit supplies controlled torque and speed for axes in industrial automation, such as indexing tables, pick-and-place arms, and conveyor positioning stages. The motor supports continuous cyclic duty while maintaining stable thermal behavior, giving machine designers a compact means of translating electrical input into repeatable mechanical motion.
The flange requires a tightening torque of 84 Nm, allowing the motor housing to be clamped securely without distortion on precision-machined frames. The motor belongs to climatic category 3K22 and may operate in indoor areas where the ambient temperature varies moderately, provided that condensation is avoided. Operation is permitted at a maximum relative humidity of 95 % and an absolute moisture content of 29 g/m³; these limits help determine suitable enclosure ventilation and heating in humid locations. Installation is permitted at elevations up to 1000 m above sea level without derating, allowing full rated performance in most production facilities. The variable V/F drive controller matches its output to the motor’s electrical characteristics to maintain suitable magnetic flux across the operating speed range.
The stator uses active materials class 3S6, which indicates the insulation and copper arrangement selected for the anticipated thermal load. Vibration resistance is categorized as mechanical class 3M12, allowing the motor to withstand shock and vibration from nearby equipment without rotor displacement or bearing damage. The mounting holes have a diameter of 13 mm and accept M12 metric fasteners, supporting accurate installation on welded or cast mounting plates. A flange socket provides the power connection and keeps the cable harness within the motor outline. This connection arrangement also helps shorten exposed cable runs and reduce paths for electromagnetic interference around adjacent control and feedback wiring.
