MS2S05-C0BTN-IMHG0-NNDNN-NN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911403647
The Bosch Rexroth Indramat MS2S05-C0BTN-IMHG0-NNDNN-NN is part of the MS2S Synchronous Servomotors series. It supports a nominal speed of 6000 RPM, has a 98 mm flange, and features a smooth shaft with a sealing ring. The servomotor uses a multiturn magnetic encoder with 18-bit resolution and offers IP65 protection.
Internal Product Review
The MS2S05-C0BTN-IMHG0-NNDNN-NN is a Bosch Rexroth Indramat MS2S synchronous servomotor with self-cooling and IP65 protection. The magnetic encoder delivers precise feedback, and the low-inertia rotor supports responsive motion behavior. A rotatable single-cable M17 connection with Quick Lock SpeedTec simplifies installation and rounds out a very capable motor package.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2S05-C0BTN-IMHG0-NNDNN-NN is a synchronous AC servomotor manufactured by Bosch Rexroth Indramat for the MS2S Synchronous Servomotors series. It supplies dynamic shaft power to automated machine axes that require precise position and speed control without adding excessive mass. The motor interfaces with compatible drives through a ctrlX SENSEmotor multi-turn encoder, making it suitable for compact packaging machines, electronics assembly systems, and material-handling equipment.
At a nominal speed of 6000 rpm, the rotor can maintain high cycle rates while operating within the continuous torque limits of the connected drive system. The motor has an ingress protection rating of IP65, which prevents dust and water jets from reaching the internal winding or bearing chamber during operation. The magnetic feedback device provides an 18-bit single-turn resolution, allowing the drive to detect small changes in shaft position. Its multi-turn counter can distinguish up to 65,536 revolutions, supporting absolute positioning over long travel distances without requiring a homing cycle. The drive electronics power the encoder from a stabilized range of 8 to 12 V, eliminating the need for an additional encoder supply rail in the control cabinet.
Mechanical alignment is provided by a centering collar with a diameter of 95 mm, which seats against the machine plate and keeps the shaft concentric within a 0.04 mm tolerance band. Mounting screws pass through a bolt circle measuring 115 mm on the 98 mm square flange, following the IM B5 mounting pattern for compatibility with corresponding machine interfaces. The encoder electronics draw only 130 mA, which limits heat generation inside the encoder housing. The motor uses self-cooling and has a low-inertia rotor for responsive acceleration during frequent positioning cycles. A smooth 19 mm shaft with a sealing ring transfers torque through a clamping coupling, while a rotatable M17 SpeedTec hybrid connection carries power and feedback signals through one cable. The motor is supplied without a holding brake, so stationary load retention must be provided by drive torque or an external locking device.
