MS2S05-B0BTN-IMHG0-NNDNN-NN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911403645
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MS2S05-B0BTN-IMHG0-NNDNN-NN is part of the MS2S Synchronous Servomotors series, featuring a nominal speed of 6000 RPM and a low inertia rotor. It uses a multiturn magnetic encoder with 18-bit resolution and ctrlX SENSEmotor interface. The servomotor has IP65 protection, a 19 mm smooth shaft with sealing ring, and is cooled by self-cooling.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth Indramat manufactures the MS2S05-B0BTN-IMHG0-NNDNN-NN synchronous servo motor as part of the MS2S Synchronous Servomotors series. As a direct-drive actuator, it converts controlled three-phase power into rotary motion for positioning tasks in automated assembly and packaging lines. Its compact size 05 frame and frame length B facilitate installation where space is limited. The integrated encoder and single-cable interface allow the drive controller to monitor shaft position and regulate torque without additional sensors.
The motor reaches a nominal speed of 6000 rpm under its rated operating conditions. Heat generated during operation is removed through the self-cooling housing, so no external fan is required. A low-inertia rotor supports rapid acceleration and deceleration during short positioning cycles. Power and feedback signals pass through a rotatable M17 single-cable connector secured by the Quick Lock SpeedTec system, while the shaft transfers torque to the connected load. Position feedback comes from a magnetic multi-turn encoder with a BASIC functional resolution of 18 bits per revolution. The encoder operates from an 8–12 V supply, draws 130 mA, and communicates through the ctrlX SENSEmotor interface. System accuracy is limited to ±360 arcsec, and the IP65 housing protects internal components against dust and water jets. The motor uses winding code BT and is supplied without a holding brake, so stationary loads must be secured by drive-applied torque or an external mechanism.
The motor uses an IM B5 / IM 3001 flange mounting arrangement, with a flange diameter of 98 mm placed against the machine frame. A centering collar measuring 95 mm aligns the motor within a 115 mm bolt circle. Four mounting holes, each 9 mm in diameter, secure the flange, and the shaft center hole follows DIN 332 Part 2 with a DS M6 thread. Concentricity is maintained within 0.04 mm, while coaxiality remains within 0.08 mm to support smooth rotation on the standard deep-groove ball bearing. The multi-turn encoder distinguishes up to 65,536 rotations before its absolute position range repeats. The motor has a smooth 19 mm shaft with a sealing ring, a standard RAL 9005 black varnish, and flange accuracy corresponding to tolerance class N.
